KegWorks Homepage
-
Whether you're a camper, setting up for an event, or just want to get a better dispensing system for your next party, this triple faucet beer jockey box kit is a big step up from your standard keg.
With three 120-foot stainless steel coils and matching hardware, this is our largest jockey box, so it’s perfect for well-attended events of all kinds. It looks great, it’s easy to use, and it keeps your beer extra cold, crisp, and refreshing.
Set it up for no-hassle dispensing at beer festivals, catered events, graduation parties, or any high-volume continuous pouring situation. Just remember that for best results you’ll want to keep the coils submerged in an ice bath and ensure your kegs also stays on ice consistently.
This jockey box kit includes a 48-qt cooler, three 120-ft stainless steel coils, three 3" stainless steel beer shanks attached to the front of the jockey box, three 3" cooler couplings attached to the back, and three chrome-plated draft beer faucets on the front with tap handle faucet knobs attached to them. To fully connect your jockey box, you'll also need a keg, beer lines, a CO2 tank, a CO2 regulator, and a keg coupler to match the brand of beer(s) you'll be serving.
To use, make an ice bath for the coils of ice cubes and water. Set up your jockey box no more than 10 feet from your ice cold keg(s). Attach the beer line from the top of the keg coupler to the cooler coupling, and the air line from the outlet barb on the CO2 regulator to other side of the coupler. Adjust the keg regulator to 40-60 PSI based on your setup. Keep both the jockey box coils and keg cold throughout to avoid foaming (no more than 40° F).
Please note: We offer many different jockey box setups. To see the full selection and match your needs exactly, please check them out here.
Be sure to wash out your lines and coils after each use, just as you would normally clean your beer lines. Check out our jockey box instructions and tips for more information on completing your setup.
-
- Ideal for high volume, continuous pouring situations
- Keeps beer cold
- Portable — dispense beer anywhere
- Drain for easy disposal of water
- CO2 tank, couplers, airline and beer not included
-
- Coil Dimensions: 120’L x 9 1/2” OD
- Cooler Dimensions: 36" x 17" x 17"
-
- (1) 100 quart white cooler with drain
- (3) 120’ Stainless steel coils
- (3) 3" Stainless steel shanks
- (3) Cooler couplings
- (3) Chrome faucets
- (3) Black faucet handles
- Attention CA Residents: Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.