KegWorks Homepage
-
Whether you're a camper, setting up for an event, or just want to get a better dispensing system for your next party, this beer jockey box kit is a big step up from your standard keg. It includes everything you'll need except the keg and the CO2 air tank.
This kit includes a durable 48 quart cooler, complete faucet and shank assembly, stainless steel dispensing coil (which should be submerged in an ice bath for optimal chilling), a precise CO2 regulator, beer and air line, and a standard US Sankey (D system) keg coupler. Just add a CO2 tank and you’ll be ready to roll.
To use, make an ice bath for the coils of ice cubes and water. Set up your jockey box no more than 10 feet from your ice cold keg. Attach the beer line from the top of the keg coupler to the cooler coupling, and the air line from the outlet barb on the CO2 regulator to other side of the coupler. Adjust the keg regulator to 40-60 PSI based on your setup. Keep both the jockey box coils and cold throughout to avoid foaming (no more than 40° F).
Be sure to wash out your lines and coils after each use, just as you would normally clean your beer lines. Check out our jockey box instructions and tips for more information on completing your setup.
Please note: We also offer a Single Faucet Coil Cooler Complete Kit with CO2 Tank and Single Faucet Cooler — 50’ Stainless Steel Coil to fit your specific set-up needs.
-
- Perfect for easy dispensing at parties or events
- Faucet and shank come pre-assembled into side
- Ultra-portable for maximum convenience
- Dispense beer without a hand pump
- Stainless steel coil keeps beer cold and will not corrode over time
- Includes drain for easy disposal of water
- Built with Coleman coolers & leak proof hardware
- Keg coupler (Sankey D) and CO2 regulator included
- CO2 tank sold separately
-
- Cooler Dimensions: 24" W x 15" H x 14" D
- Cooler Capacity: 48 Qt
- Overall Coil Dimensions: 6.75" H x 5.25" W
- Coil Dimensions: 50' L x 5/16" OD
- Air Line Jumper Dimensions: 5/16" ID x 5’ L
- Beer Line Jumper Dimensions: 3/8" ID x 5’ L
-
- (1) 48 qt single faucet cooler
- (1) 50' x 5/16" OD mini stainless steel coil
- (2) Hex Nuts for Beer Line - one on either side of coils
- (2) Ferrules for 5/16" OD coil - one on either side of coils
- (2) Grommets for 5/16" OD coil - one on either side of coils
- (1) 3" Faucet Shank for Jockey Boxes
- (1) 3" Cooler Coupling for Jockey Boxes
- (1) Chrome faucet
- (1) Black faucet handle
- (1) Beer Line Jumper
- (1) US Sankey D System Coupler
- (1) Air Line jumper
- (1) Double Gauge CO2 regulator
- N/A
- N/A
- null
-
Attention CA Residents:
Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.