KegWorks Homepage
-
Install this 8 faucet kegerator in your store and watch your bottom line get a healthy boost as craft beer lovers enjoy a great selection.
The exterior of the filling station is coated with black wear-resistant vinyl on steel for a perfect combination of durability and elegance. The stainless steel top is mounted with two draft towers that come complete with four pre-installed draft beer faucets apiece. A bar drip tray comes standard to ensure easy cleaning from any pouring mishaps.
The inside of the massive kegerator fridge features galvanized steel walls and ceilings with room for up to 10 1/6 kegs or three 1/4 or 1/2 (full kegs). The reinforced floor and self-closing door with keyed lock are made from heavy-duty stainless steel, and magnetic gaskets along the door’s lip ensure a strong, frost-saving seal.
Foamed-in-place polyurethane insulation provides maximum cooling efficiency and adds an extra degree of strength to the durable cabinet. The lift-out heavy duty forced-air refrigeration system uses CFC-free R134a refrigerant to create a steady flow of cold air and provide fast, uniform recovery and cooling of your system.
This double tower kegerator kit also includes all the components you need for pouring out 8 draft beers from the same unit. It includes two four tap towers, a 10-lb CO2 air tank, a whopping 8 Sankey couplers, two 4-way secondary CO2 regulators, brass faucets, and beer and air lines for each of the 8 taps.
With the ability to offer up to 8 beers from this growler tap station from an efficiently-cooled draft system from fridge to each kegerator tower, your customers will walk away pleased.
Please note: If this configuration does not meet your needs call our draft beer equipment sales department at 866.881.BEER (2337) or e-mail your request to [email protected].
-
- Sleek, black exterior coated with wear-resistant vinyl on steel
- Cabinet is insulated with foamed-in-place polyurethane
- Refrigerant used is R134a, which is CFC-free
- Galvanized steel interior
- Top is made from heavy-duty stainless steel
- Will hold 10 to 12 sixth kegs, 3 quarter keg or 3 half kegs
- Knock out plug on compressor housing can be removed to run CO2 line into unit from external tank
- CO2 tank can be stored inside unit, but will take the place of at least one sixth keg
-
- External dimensions: 59"W x 37 1/4"H x 28 3/16"D
- Depth with door open: 50 9/16"
- Net Capacity: 23.8 Cu Ft.
- 115 volts, 7.2 amps, 1/3 HP
- Unit pre-wired with 8’ long cord and plug set
-
- (1) Beverage Air DD58 Kegerator
- (2) 4 tap T-tower with chrome plated brass faucets and 5’ beer lines with hex connectors
- (8) US Sankey (type D) keg couplers
- (9) 5’ air lines 5/16" diameter with screw clamps
- (2) 4 way secondary CO2 regulator
- (1) Double gauge two product primary CO2 regulator
- (1) 10lb CO2 tank
- (2) Removable drip trays
- (1) Heavy duty stainless steel top w/rails
- (1) Shelf for internal storage of 5# CO2 tank
- Power cord and grounded plug are provided
-
- Refrigeration body ships separately from draft dispensing equipment
- Ships by freight truck, express shipping unavailable
- Curbside delivery only: Someone must be present to receive and unload product
-
- Four year warranty on compressor and one year on parts direct through Beverage Air (Service Line: 1-800-684-1199). Warranty valid only in the continental United States.
- null
- Attention CA Residents: Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.