KegWorks Homepage
-
Install this 6 faucet kegerator in your store and watch your bottom line get a healthy boost as craft beer lovers enjoy a great selection.
The outside of this unit features black wear-resistant vinyl on steel construction with a top made from heavy-duty stainless steel. An included drip tray makes for easy cleaning from any accidental drips or spills from the pre-installed draft tower with six faucets.
On the inside, this unit is solidly constructed with galvanized steel walls and ceilings, and a reinforced floor and door made from stainless steel. The self-closing door comes complete with a keyed lock and magnetic gaskets to ensure a proper, frost-saving chill every time it shuts.
The cabinet can hold up to six 1/6 kegs or two 1/4 or 1/2 kegs with a CO2 tank for hassle-free dispensing. The insulation is foamed-in-place polyurethane that guarantees efficient operation while offering added overall strength to the unit.
This tower kegerator kit also includes all the components you need for pouring out 6 draft beers from the same unit. It includes a 6 tap T-tower, a 10-lb CO2 air tank, 6 Sankey couplers, a double gauge CO2 regulator, brass faucets, and beer and air lines for each of the 6 taps.
A lift-out heavy duty forced-air refrigeration system uses CFC-free refrigerant (R134a) to create a steady flow of cold air through the complete product load and provides fast uniform recovery and cooling for optimal draft dispensing performance.
Please note: If this configuration does not meet your needs call our draft beer equipment sales department at 866.881.BEER (2337) or e-mail your request to [email protected].
-
- Sleek, black exterior coated with wear-resistant vinyl on steel
- Cabinet is insulated with foamed-in-place polyurethane
- Refrigerant used is R134a, which is CFC-free
- Galvanized steel interior
- Top is made from heavy-duty stainless steel
- Will hold 4 to 6 sixth kegs, 2 quarter kegs or 2 half kegs
- Knock out plug on compressor housing can be removed to run CO2 line into unit from external tank
- CO2 tank can be stored inside unit, but will take up at least one sixth keg spot
-
- Dimensions: 50 1/2"W x 37 1/4"H x 27"D
- Depth with door open: 49 1/16"
- Net Capacity: 19.8 Cu Ft.
- 115 volts, 7.2 amps, 1/3 HP
- Unit pre-wired with 8’ long cord and plug set
-
- (1) Beverage Air DD50 Kegerator
- (1) 6 tap T-tower with chrome plated brass faucets and 5’ beer lines with hex connectors
- (6) US Sankey (type D) keg couplers
- (7) 5’ air lines 5/16" diameter with screw clamps
- (2) 3 way secondary CO2 regulator
- (1) Double gauge two product primary CO2 regulator
- (1) 10lb CO2 tank
- (1) Removable drip tray
- (1) Heavy duty stainless steel top w/rails
- (1) Shelf for internal storage of 5# CO2 tank
- Power cord and grounded plug are provided
-
- Refrigeration body ships separately from draft dispensing equipment
- Ships by freight truck, express shipping unavailable
- Curbside delivery only: Someone must be present to receive and unload product
-
- Four year warranty on compressor and one year on parts direct through Beverage Air (Service Line: 1-800-684-1199). Warranty valid only in the continental United States.
- null
- Attention CA Residents: Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.