KegWorks Homepage
-
This three-tap kegerator has everything you need to pour ice-cold pints.
The outside of this unit is coated with black wear-resistant vinyl on steel, while the top is made from heavy-duty stainless steel with an included drip tray for easy cleaning.
The inside features galvanized steel walls and ceilings with reinforced floors and door sills made from heavy-duty stainless steel for long-lasting durability. Each unit has a self-closing door with key lock and magnetic gaskets to ensure that you create a tight seal every time it closes.
The cabinet has room for up to three 1/6th kegs with a CO2 tank to power the dispensing. It's insulated with foamed-in-place polyurethane which helps to provide maximum operating efficiency and strengthen the overall construction.
This is a freestanding keg fridge, and includes four swivel casters (removable) that allow you to easily move the fridge whenever necessary. However, this unit can’t be built into a bar as it needs room for proper ventilation.
A lift-out heavy duty forced-air refrigeration system (using CFC-free R134a refrigerant) creates a steady flow of cold air through the complete product load and provides fast, uniform recovery and cooling for optimal treatment of your draft beer system.
Please note: If this configuration does not meet your needs call our draft beer equipment sales department at 866.881.BEER (2337) or e-mail your request to [email protected].
-
- Stainless steel interior floor
- Self closing door with key lock
- Will hold 3 to 4 sixth kegs, 1 quarter keg or 1 half keg
- Knock out plug on compressor housing can be removed to run CO2 line into unit from external tank
- CO2 tank can be stored inside unit, but will take up at least one sixth keg spot
- Black vinyl coated steel exterior
-
- External dimensions: 24” long x 24” wide x 49-1/8” high (with casters installed)
- Net internal capacity is 7.8 cubic feet
- Internal dimensions: 19” long x 23.75” wide (deep) x 29.5” high
- Unit pre-wired with 8’ long cord and plug set
- 1/5 HP Compressor
- 4.0 amps
- 115 VAC Power Connection
- Caster Dimensions: 4”
-
- (1) BM23 kegerator fridge
- (1) 3 tap 3” diameter draft tower with chrome plated brass faucets and 5’ beer lines with hex connectors
- (3) US Sankey (type D) keg couplers
- (4) 5’ air lines 5/16” diameter with screw clamps
- (1) 3 way secondary CO2 regulator
- (1) Double gauge primary CO2 regulator
- (1) 10lb CO2 tank
- (4) Heavy Duty Swivel Casters
- (1) Removable drip tray
- (1) Heavy duty stainless steel top w/rails
- (1) Shelf for internal storage of 5# CO2 tank
- Power cord and grounded plug are provided
-
- Refrigeration body ships separately from draft dispensing equipment
- Ships by freight truck, express shipping unavailable
- Curbside delivery only: Someone must be present to receive and unload product
-
- Four year warranty on compressor and one year on parts direct through Beverage Air (Service Line: 1-800-684-1199). Warranty valid only in the continental United States.
-
Attention CA Residents:
Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.