KegWorks Homepage
-
Whether you're a camper, setting up for an event, or just want to get a better dispensing system for your next party, this double faucet beer jockey box kit is a big step up from your standard keg.
This 48 quart cooler has a fully-functional draft beer faucet and shank pre-assembled in its side. The two included 50-foot stainless steel jockey box coils should be kept in an ice bath to provide an ultimate refreshing experience with each effortless pour.
This kit includes a durable 48 quart cooler, complete double faucet and shank assembly, two stainless steel dispensing coils (which should be submerged in an ice bath for optimal chilling), a precise two product CO2 regulator, beer and air lines, and two standard US Sankey (D system) keg couplers. Just add a CO2 tank and you’ll be ready to roll.
To use, make an ice bath for the coils of ice cubes and water. Set up your jockey box no more than 10 feet from your ice cold keg. Attach the beer line from the top of the keg coupler to the cooler coupling, and the air line from the outlet barb on the CO2 regulator to other side of the coupler. Adjust the keg regulator to 40-60 PSI based on your setup. Keep both the jockey box coils and cold throughout to avoid foaming (no more than 40° F).
Be sure to wash out your lines and coils after each use, just as you would normally clean your beer lines. Check out our jockey box instructions and tips for more information on completing your setup.
Please note: We offer many different jockey box setups. To see the full selection and match your needs exactly, please click here.
-
- Perfect for easy dispensing at parties or events
- Pour two separate beers with two faucets available
- Faucet and shank come pre-assembled into side
- Ultra-portable for maximum convenience
- Dispense beer without a hand pump
- Stainless steel coil keeps beer cold and will not corrode over time
- Includes drain for easy disposal of water
- Built with Coleman coolers & leak proof hardware
- Two keg couplers (Sankey D) and dual-product CO2 regulator included
- CO2 tank sold separately
-
- Cooler Dimensions: 24" W x 15" H x 14" D
- Cooler Capacity: 48 Qt
- Overall Coil Dimensions: 6.75" H x 5.25" W
- Coil Dimensions: 50' L x 5/16" OD
- CO2 Tank Capacity: 5 lb
- Air Line Jumper Dimensions: 5/16" ID x 5’ L
- Beer Line Jumper Dimensions: 3/8" ID x 5’ L
-
- (1) 48 qt single faucet cooler
- (2) 50' x 5/16" OD mini stainless steel coil
- (4) Hex Nuts for Beer Line - one on either side of coils
- (4) Ferrules for 5/16" OD coil - one on either side of coils
- (4) Grommets for 5/16" OD coil - one on either side of coils
- (2) 3" Faucet Shank for Jockey Boxes
- (2) 3" Cooler Coupling for Jockey Boxes
- (2) Chrome faucet
- (2) Black faucet handle
- (2) Beer Line Jumper
- (2) US Sankey D System Coupler
- (2) Air Line Jumper
- (1) 2 Product CO2 Regulator
- N/A
- N/A
- null
-
Attention CA Residents:
Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.