KegWorks Homepage
-
Add the luxurious design of this decorative bar bracket with shiny brass bar rail tubing, and your bar will be the talk of the town. This polished brass bracket is a standout addition to any home or commercial bar.
This stylish form of bar foot rail bracket combines a design where the metal tubing looks almost as it is floating next to the bar with beautiful art etched throughout the base. It also allows you to maintain a clean floor, eliminate worry of guests stubbing their toes on floor brackets, and avoid the dilemma of drilling into the floor during installation.
The stunning, shiny brass finish of this bar bracket will precisely match your Polished Brass two-inch outside diameter bar rail tubing. This decorative bar bracket does not include a back access bolt, making installation of the bar rail very simple.
To install the bar rail bracket, you will need to use a screwdriver to attach the 4 mounting screws on the front end of the bar facing. Plastic expansion anchors are also included for a sturdy fit. The set screw goes into the hole where the bracket holds the tube and is screwed into the bar rail tubing. We do recommend that you screw into a stud or use anchors to support the weight of the rail and people stepping on it.
This bar mount bracket style allow you to choose the height of your bar rail. Be sure to carefully measure where each bracket will be placed before drilling into your bar. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.
Properly installed bar railing brackets ensure that your foot rail will hold up to the rigors of a whole bunch of feet resting on them. If you're still unsure of which bracket will fit best in your bar, check out our bar foot rail brackets guide for more information on each of the options.
Check out our Complete Guide to Bar Rails for ordering hints, do-it-yourself installation instructions and more!
-
- Made of decoratively etched polished brass
- For use with 2” Outside Diameter bar rail tubing
- 4 mounting screws attach to the front of the bar
- Brackets should be used at both ends of rail tubing, plus one at every 4' increment
- Mounting screws for bar facing included
- Suitable for indoor use only
-
- Overall Dimensions: 7.25"H x 7.55"D x 1.5"W
- Fits 2" Outside Diameter Tubing
- Click Here For Additional Measurements
-
- (1) Decorative bar bracket
- (4) Mounting screws
- (4) Plastic expansion anchors
- (1) Set screw
- null
- null
- null
-
Attention CA Residents:
Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.