KegWorks Homepage
-
Serving large-batch cocktails on tap is a great way for a creative bartender to set their space apart. However, kegged cocktails require certain equipment to do it right. Luckily, we've put (almost) all of them into this kegerator conversion kit to make it easy!
It starts with 100% stainless-steel components. Craft cocktails, and the ingredients inside them, can be very corrosive to your draft system, much more so than draft beer. Luckily, with all stainless steel, you don't have to worry about that, as stainless steel will not corrode over time.
It also requires a Corny, or Cornelius keg for batching the cocktail and a ball-lock disconnect to connect the keg to the barrier line, which will transport the cocktail up through the draft tower to the faucet tap. This kit includes the Corny keg parts you need for proper setup, though not the keg.
Many carbonated cocktails, such as a variety of Sours, are properly served with a foamy head atop. The included nitrogenating keg lid with a diffusion stone inserts directly into the top of the Corny keg, allowing you to create the cascading effect and the proper foam head found in a variety of craft cocktails.
For a full carbonated draft cocktail setup, you'll need a CO2 air tank and CO2 regulator, but a standard CO2 draft faucet. This kit includes the CO2 tank regulator and stainless steel shank. It does not include the tank itself.
In serving draft cocktails, you'll want maximum control of your pour. That's why this kit includes the top-notch Perlick 650SS Flow Control Faucet. This faucet tap allows you to regulate the speed of your pour with a simple flow-control lever. Create just the right amount of foam in each cocktail with this intuitive design.
Barrier lines are included in this kegerator kit, because they are more durable and resistant to flavor stain than standard vinyl lines. A stainless-steel drip tray looks classy and contains messy spills.
With an extra refrigerator, some basic hand tools, and this kegerator kit, you're not too far away from craft cocktails on draft. Learn how to set up your system in minutes with this simple homemade kegerator guide! We also have a cocktails on tap guide for more info.
-
- Kegerator conversion kit for carbonated cocktails on tap
- Quick disconnects attach to Cornelius keg
- Includes 100% stainless steel contact - will not corrode over time
- Barrier lines are more resistant to staining
- Turn an old fridge into a cocktail kegerator or convert an existing system
- Nitro-infusing lid is used for including a foam head atop certain cocktails
- Does not include Corny keg or Nitrogen tank
- Follow our instructions for easy setup
- N/A
-
- (1) 6" Wall Mount Drip Tray - Stainless Steel - No Drain - 6" x 6"
- (1) Beer Tap Faucet Handle Black Knob
- (1) Perlick 650SS Flow Control Faucet
- (1) 5" Stainless Steel Shanks
- (1) Barrier Line Jumper - 1/4" ID - 5' Barrier Line with Stainless Steel Tail Piece Connector & Screw Clamp
- (1) Ball Style Quick Disconnect - Gas
- (1) Ball Style Quick Disconnect - Liquid
- (1) Air Line Jumper - 5/16" ID - 5' Vinyl Hose with Screw Clamps
- (1) Taprite Economy CO2 Regulator
- (1) Keg Lid for Nitrogen-Infused Coffee
- N/A
- N/A
- null
- Attention CA Residents: Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.